broncolor.us
elinchrom.com
gravitybackdropsus.com
kupogrip.com
nanliteus.com
phottixus.com
sekonic.com
benrousa.com
novoflexus.com
saramonicusa.com
calibrite.com
xritephotous.com
shimodadesigns.com
tenba.com
accsoonusa.com
heliopan.com
jupious.com
kaiserfotous.com
rotatrimus.com
toyoview.com
Kupo | SKU: KG003212
- Constructed of chrome plated steel
- Max height: 4.8' / 57.9"(1.47m / 147cm) / Max load: 88.2lbs (40kgs)
- Equipped with a memory collar
- Comes with 1 leveling leg
- The stand is assembled by nuts and bolts rather than fixed rivets, to make it easier for maintenance and better for adjusting tightness.
Overview
The Followspot Stand is designed to hold loads up to 88.2lbs at a maximum working height of 4.8' using a 1 riser, 2 section design. It was designed for low height, high payload capacity, a memory collar is attached.
Specifications
- Closed Length (cm):
- 109
- Closed Length (in):
- 43
- Fixed Stand Adapter:
- Yes
- Footprint Diameter (cm):
- 110.0cm
- Footprint Diameter (in):
- 43.3in
- Leg Diameter 1 (mm):
- 30
- Leg Diameter (in):
- 1.18in
- Leg Diameter (mm):
- 30.0mm
- Leveling Leg:
- Yes
- Maximum Extension (cm):
- 147.0cm
- Maximum Extension (in):
- 57.9in
- Maximum Payload Capacity (lb):
- 88.2
- Maximum Payload Capacity (kg):
- 40
- Physical:
- Product Height (cm):
- 14.5cm
- Product Height (in):
- 5.71in
- Product Length (cm):
- 109.0cm
- Product Length (in):
- 42.91in
- Product Weight (kg):
- 7.4kg
- Product Weight (lb):
- 16.28lb
- Product Width (cm):
- 16.3cm
- Product Width (in):
- 6.42in
- Removable Stand Adapter:
- No
- Riser 1 Diameter (in):
- 1.57in
- Riser 1 Diameter (mm):
- 40.0mm
- Riser 2 Diameter (in):
- 1.97in
- Riser 2 Diameter (mm):
- 50.0mm
- Risers:
- 1
- Sections:
- 2
- Stand Adapter Type:
- Junior Receiver
- Suggested Caster:
- KC-100 / KS940912
- Warranty:
- Limited Two-Year Warranty
