broncolor.us
elinchrom.com
gravitybackdropsus.com
kupogrip.com
nanliteus.com
phottixus.com
sekonic.com
benrousa.com
novoflexus.com
saramonicusa.com
calibrite.com
xritephotous.com
shimodadesigns.com
tenba.com
accsoonusa.com
heliopan.com
jupious.com
kaiserfotous.com
rotatrimus.com
toyoview.com
Nanlite | SKU: BD-PT30C+EC
- STUDIO QUALITY LIGHTING - An amazingly versatile studio lighting fixture that featuring 0-100% dimming, a max output of 2850 lumens, adjustable color temperature from 6500-2700K as well as a full spectrum RGB and pre-programmed special lighting effects.
- FULL CREATIVE CONTROL- Easily achieve beautiful results without adding plastic filters or gels. The PavoTube Tubes' easy-to-use dials and buttons enable you to dial temperature from warm to cold (6500K-2700K) or hue and saturation in RGB mode.
- POWER ANYWHERE - Perfect for use in the studio or on location, PavoTube RGB+W Tubes can run off either the included AC adapter or their internal Li-ion batteries for up to 2 hours at full brightness when no mains power is available.
- LIMITLESS POSSIBILITIES - Simply connect multiple PavoTube RGB+W Tubes together via the included sync cord to build and shape a powerful bank of lights with synchronized adjustments and effects
- WE'VE GOT YOU COVERED - For over 25 years Nanlite has been producing innovative LED lighting solutions backed by a 2 year limited warranty extendible to 3 years limited with registration. Warranty valid only on products purchased from authorized dealers.
Overview
Nanlite PavoTube RGB+W LED Tubes are an amazingly versatile lighting fixture that features 0 to 100% dimming with maximum illumination of 2850 lumens at 5600K, as well as a full spectrum RGB and pre-programmed special lighting effects. With the color temperature adjustable from 6500-2700K, a CRI of 98 and a TLCI of 95 this device exceeds most studio lighting needs. It also features a choice of over 360 static light colors on the RGB spectrum and can cycle through the entire spectrum at a speed of your choice.
With six pre-programmed special effects in a simple-to-master menu system, this Nanlite RGB light tube makes it easy to imitate lighting scenarios that can otherwise be tricky to recreate. At the touch of a button, you can simulate the lighting effects of an emergency services vehicle (cop car), flame (candlelight), lightning storm, an SOS signal, and two different types of continuous flicker/flash. Each of the special effects has many different settings to help you refine it and create precisely the effect you need, as well as an LCD panel showing you exactly what settings you're using, making it easy to fine tune and then recreate them in future.
With easy-to-use dials and buttons set into one end of the light tube, as well as built-in 2.4ghz radio control and master/slave functions, this RGB tube light is versatile enough to slot right into your existing set up without needing a lot of extra preparation. This light’s master/slave mode also makes it easy to synchronize multiple lights by chaining them together using the included sync cable to create a powerful bank of lights performing synchronized effects.
Perfect for use in the studio or on location, this lightweight tube is available in 2-foot and 4-foot lengths. Both length variants are 1.9 inches in diameter making them T12 compatible. It can be powered using the included AC adapter, and also has two built-in 2200MaH batteries for use where no mains power supply is available. Supplied in a padded carrying case complete with all the accessories you need to get going, including mounting clips for adapting your light to a tripod or the wall. The light itself has octagonal ends, allowing it to be placed on the floor or a surface at a specific angle to give you maximum control over the finished effect of the lighting.
Both 2-foot and 4-foot variants are available as single lights as well as two light and four light kits.
Read More
With six pre-programmed special effects in a simple-to-master menu system, this Nanlite RGB light tube makes it easy to imitate lighting scenarios that can otherwise be tricky to recreate. At the touch of a button, you can simulate the lighting effects of an emergency services vehicle (cop car), flame (candlelight), lightning storm, an SOS signal, and two different types of continuous flicker/flash. Each of the special effects has many different settings to help you refine it and create precisely the effect you need, as well as an LCD panel showing you exactly what settings you're using, making it easy to fine tune and then recreate them in future.
With easy-to-use dials and buttons set into one end of the light tube, as well as built-in 2.4ghz radio control and master/slave functions, this RGB tube light is versatile enough to slot right into your existing set up without needing a lot of extra preparation. This light’s master/slave mode also makes it easy to synchronize multiple lights by chaining them together using the included sync cable to create a powerful bank of lights performing synchronized effects.
Perfect for use in the studio or on location, this lightweight tube is available in 2-foot and 4-foot lengths. Both length variants are 1.9 inches in diameter making them T12 compatible. It can be powered using the included AC adapter, and also has two built-in 2200MaH batteries for use where no mains power supply is available. Supplied in a padded carrying case complete with all the accessories you need to get going, including mounting clips for adapting your light to a tripod or the wall. The light itself has octagonal ends, allowing it to be placed on the floor or a surface at a specific angle to give you maximum control over the finished effect of the lighting.
Both 2-foot and 4-foot variants are available as single lights as well as two light and four light kits.
Technical Data
- Accepts Grids:
- Not Applicable
- Accessory Mount(s):
- No
- Accessory Port(s):
- No
- Amp-Hours:
- 0
- Battery Capacity (Wh):
- 0
- Battery Cells:
- 0
- Battery Chemistry:
- Li-Ion
- Battery Compatibility:
- Built in
- Battery Included:
- Yes
- Battery Maximum Output Voltage:
- 0
- Battery Required:
- Yes
- Battery Type:
- battery_type_lithium_ion
- Beam Angle Flood:
- Not Applicable
- Beam Angle Spot:
- Not Applicable
- Channels:
- Not Applicable
- Charge Time to Full (Hours):
- 4
- Charge Time to 80% (Hours):
- 3
- Charger:
- Built in
- Closed Length (cm):
- Not Applicable
- Closed Length (in):
- Not Applicable
- Color Temperature (Kelvin):
- 2700K-6500K
- Compatible D-Tap Adapter:
- Nanlite CB-DT-DC D-Tap cable with DC Socket
- Compatible Remote:
- NANLINK WS-RC-C2 Remote Control
- Compatible Wifi Adapter:
- NANLINK WS-TB-1 Transmitter Box
- Cooling System:
- No
- CRI:
- Average 95
- Depth Rating:
- Not Applicable
- Dimming:
- 0-100%
- DMX Control:
- No
- Electrical Load Capacity:
- 0
- Footprint Diameter (cm):
- cm
- Footprint Diameter (in):
- in
- Frequency:
- 2.4ghz
- Groups:
- Not Applicable
- Includes Rechargeable Battery:
- Yes
- Interior Color:
- Not Applicable
- Light Modifier Bayonet Mount:
- Not Applicable
- Load Capacity (kg):
- Not Applicable
- Load Capacity (lb):
- Not Applicable
- Lumen Output 3200K:
- 2700LM
- Lumen Output 5600K:
- 2850LM
- Lux @ 0.5m 5600K:
- 1630
- Lux @ 1m 2700K:
- 473 Lux
- Lux @ 1m 3200K:
- 514
- Lux @ 1m 5600K:
- 588
- Max Power Consumption:
- 30W
- Maximum Height (in):
- Not Applicable
- Maximum Height (cm):
- Not Applicable
- Physical:
- Minimum Height (cm):
- Not Applicable
- Minimum Height (in):
- Not Applicable
- Mount:
- T12 and 1/4 20" via adapter
- Number of Batteries:
- 2
- Number of Rods:
- Not Applicable
- Operating Temperature:
- 0
- Power Source:
- 100-240V AC, 15V 4A DC
- 'Product Diameter (cm):
- 4.8
- 'Product Diameter (in):
- 1.89
- Product Inner Diameter (cm) Ring Lights Only:
- Not Applicable
- Product Inner Diameter (in) Ring Lights Only:
- Not Applicable
- Product Height (cm):
- cm
- Product Height (in):
- in
- Product Length (cm):
- 117.0cm
- Product Length (in):
- 46.06in
- Product Weight (kg):
- 1.25kg
- Product Weight (lb):
- 2.76lb
- Product Width (cm):
- cm
- Product Width (in):
- in
- Removable Front Diffusion:
- Not Applicable
- Removable Interior Baffle:
- Not Applicable
- Requires Speed Ring:
- Not Applicable
- Runtime @ 100% Brightness (Hours):
- 2.2
- Runtime @ 50% Brightness (Hours):
- 5.2
- Runtime @ 10% Brightness (Hours):
- 17.2
- Shape:
- Not Applicable
- TLCI:
- Average 95
- Umbrella Shaft Diameter:
- Not Applicable
- Warranty:
- Limited 2 Year Warranty (Extend to 3 Years Total With Online Registration)
- Wireless Control Type:
- 2.4G, WIFI
- Wireless Range:
- Not Applicable
Lux / Foot Candles
| Distance and CCT | Distance and Color | ||
|---|---|---|---|
| @ 0.5m 2700K | 1400 lux / 130.1 fc | @ 0.5m Red | 546 lux / 50.7 fc |
| @ 1m 2700K | 473 lux / 43.9 fc | @ 1m Red | 189 lux / 17.6 fc |
| @ 2m 2700K | 135 lux / 12.5 fc | @ 2m Red | 55 lux / 5.1 fc |
| @ 3m 2700K | 62 lux / 5.8 fc | @ 3m Red | 26 lux / 4.2 fc |
| @ 0.5m 3200K | 1460 lux / 135.6 fc | @ 0.5m Green | 1440 lux / 133.8 fc |
| @ 1m 3200K | 514 lux / 50.3 fc | @ 1m Green | 385 lux / 35.8 fc |
| @ 2m 3200K | 141 lux / 13.1 fc | @ 2m Green | 101 lux / 9.4 fc |
| @ 3m 3200K | 68 lux / 6.3 fc | @ 3m Green | 43 lux / 4 fc |
| @ 0.5m 5600K | 1630 lux / 151.4 fc | @ 0.5m Blue | 408 lux / 37.9 fc |
| @ 1m 5600K | 588 lux / 54.6 fc | @ 1m Blue | 138 lux / 12.8 fc |
| @ 2m 5600K | 164 lux / 15.2 fc | @ 2m Blue | 39 lux / 3.6 fc |
| @ 3m 5600K | 79 lux / 7.3 fc | @ 3m Blue | 18 lux / 1.7 fc |
| @ 0.5m 6500K | 1740 lux / 161.7 fc | ||
| @ 1m 6500K | 579 lux / 53.8 fc | ||
| @ 2m 6500K | 169 lux / 15.7 fc | ||
| @ 3m 6500K | 77 lux / 7.2 fc |
Dimensions
- Product Length (cm)
- 117
- Product Length (in)
- 46.06
- Product Weight (kg)
- 1.25
- Product Weight (lb)
- 2.76
Special Effects
STORM/ FLASH/CANDLE/COLOR CYCLE/COP CAR
