null
Skip to main content

Nanlite PavoTube II 6c Ball Head Kit

SKU: PT6C1KIT | FREE U.S. shipping on all orders over $100!

$99.00
Students and Educators: Enroll or Log in for exclusive EDU savings!
  • STUDIO QUALITY LIGHTING - With adjustable color temperature from 7500-2700K with green to magenta adjustment, a CRI of 98, and a TLCI of 95, the PavoTube II 6C packs studio-quality lighting into a travel-friendly package.
  • FULL CREATIVE CONTROL- Easily achieve beautiful results without adding plastic filters or gels. The PavoTube II 6C's easy-to-use dials and buttons enable you to dial temperature from warm to cold (7500K-2700K) or hue and saturation in RGB mode.
  • INCLUDES ADDITIONAL MOUNTING SOLUTIONS - This kit includes a Transparent Polycarbonate Clip and Mini Ball Head with Hot Shoe Adapter and 1/4''-20 Mount which providan adjustable and transparent mounting option for a Pavotube II 6C either on-camera via your camera's hot shoe or on any light stand equipped 1/4"-20 mount.
  • NO CORDS NEEDED - Powered by an internal Li-ion battery, the PavoTube II 6C can run for 65 minutes at full brightness and can be charged by any USB-C source. The included PavoTube II 6C Battery Grip enables an additional approx. 70 mins hour of untethered runtime.
  • GOES ANYWHERE - Small enough to fit in any gear bag, the PavoTube II 6C is compatible with most T12 diameter accessories and features two 1/4 20" receivers as well as powerful magnets for mounting nearly anywhere.

Overview

The Nanlite PavoTube II 6c Ball Head Kit includes one PavoTube II 6C RGBWW LED Tube and one Transparent Polycarbonate Clip and Mini Ball Head with Hot Shoe Adapter and 1/4''-20 Mount which provides an adjustable and transparent mounting option for a Pavotube II 6C either on-camera via your camera's hot shoe or on any light stand equipped 1/4"-20 mount. With built-in Bluetooth and 2.4G, it can be fully controlled wirelessly with the free NANLINK mobile app.

Studio Quality Lighting on the Go
With adjustable color temperature from 7500-2700K with green to magenta adjustment, a CRI of 98, and a TLCI of 95, the PavoTube II 6C packs studio-quality lighting into a go-anywhere, travel-friendly package. It also features a choice of over 360 static light colors on the RGB spectrum and can cycle through the entire spectrum at a speed of your choice.

No Cords Needed
Powered by an internal Li-ion battery, the PavoTube II 6C can run for 65 minutes at full brightness and can be charged by any USB-C source. With built-in Bluetooth and 2.4G, it can be fully controlled wirelessly with the free NANLINK mobile app.

Includes Additonal Mounting Solutions
This kit includes a Transparent Polycarbonate Clip and Mini Ball Head with Hot Shoe Adapter and 1/4''-20 Mount which providan adjustable and transparent mounting option for a Pavotube II 6C either on-camera via your camera's hot shoe or on any light stand equipped 1/4"-20 mount.

Goes Anywhere
Small enough to fit in any gear bag, the PavoTube II 6C is compatible with most T12 diameter accessories and features two 1/4 20" receivers as well as powerful magnets for mounting nearly anywhere.

Practical Effects
With fifteen pre-programmed special effects in a simple-to-master menu system, the PavoTube II 6C makes it easy to imitate lighting scenarios that can otherwise be tricky to recreate. At the touch of a button, you can simulate the lighting effects of an emergency services vehicle (cop car), flame (candlelight), lightning storm, an SOS signal, an explosion, welding, camera flashes, and more.

Technical Data

Accepts Grids:
Not Applicable
Accessory Port(s):
No
Amp-Hours:
2200mAh
Battery Capacity (Wh):
8.14
Battery Cells:
1
Battery Chemistry:
Li-Ion
Battery Compatibility:
Built in 3.7V/2200mA
Battery Included:
Yes
Battery Maximum Output Voltage:
3.7V
Battery Required:
Yes
Beam Angle Flood:
180
Beam Angle Spot:
Not Applicable
Channels:
Not Applicable
Charge Time to Full (Hours):
2.5
Charge Time to 80% (Hours):
2
Charger:
USB-C
Closed Length (cm):
Not Applicable
Closed Length (in):
Not Applicable
Color Temperature (Kelvin):
2700K-7500K
Compatible D-Tap Adapter:
Not Applicable
Compatible Remote:
Nanlite RC-1 Remote Control
Compatible Wifi Adapter:
Nanlite W-2 Wifi Adapter
Cooling System:
No
CRI:
Average 95
Depth Rating:
Not Applicable
Dimming:
0-100%
DMX Control:
No
Electrical Load Capacity:
8.14W
Footprint Diameter (cm):
cm
Footprint Diameter (in):
in
Frequency:
2.4ghz
Groups:
Not Applicable
Includes Rechargeable Battery:
Yes
Interior Color:
Not Applicable
Light Modifier Bayonet Mount:
Not Applicable
Load Capacity (kg):
1.5 Ball Head)
Load Capacity (lb):
3.3 (Ball Head)
Lumen Output 3200K:
490
Lumen Output 5600K:
520
Lux @ 0.5m 5600K:
670
Lux @ 1m 2700K:
148
Lux @ 1m 3200K:
155
Lux @ 1m 5600K:
169
Max Power Consumption:
6w
Maximum Height (in):
Not Applicable
Maximum Height (cm):
Not Applicable
Physical:
 
Minimum Height (cm):
Not Applicable
Minimum Height (in):
Not Applicable
Mount:
T12, 2x 1/4 20", Magnets
Number of Rods:
Not Applicable
Operating Temperature:
-40℃ ~ 55℃
Power Source:
DC5V 2A,100-240V AC
'Product Diameter (cm):
3.8
'Product Diameter (in):
1.47
Product Inner Diameter (cm) Ring Lights Only:
Not Applicable
Product Inner Diameter (in) Ring Lights Only:
Not Applicable
Product Height (cm):
3.8cm
Product Height (in):
1.47in
Product Length (cm):
25.0cm
Product Length (in):
9.84in
Product Weight (kg):
0.26kg
Product Weight (lb):
0.57lb
Product Width (cm):
3.9cm
Product Width (in):
1.54in
Removable Front Diffusion:
Not Applicable
Removable Interior Baffle:
Not Applicable
Requires Speed Ring:
Not Applicable
Runtime @ 100% Brightness (Hours):
65 mins
Runtime @ 50% Brightness (Hours):
100 mins
Runtime @ 10% Brightness (Hours):
6 Hours
Shape:
Not Applicable
TLCI:
Average 97
Umbrella Shaft Diameter:
Not Applicable
Warranty:
Limited 2 Year Warranty (Extend to 3 Years Total With Online Registration)
Wireless Control Type:
Wireless Remote / Wifi via adapter
Wireless Range:
Not Applicable

Lux / Foot Candles

Dimensions

Special Effects

Welcome to the NEW PhotoVideo EDU.

To take advantage of the savings, please make sure to register.

If you were eligible on the old site, you must resubmit your documents to re-establish your eligibility.

Enroll