null
Skip to main content

Benro C373F Series 3 CF Video Tripod & S8 Head - 75mm Half Ball Adapter, 3 Leg Sections, Flip Lock Leg Release

SKU: C373FBS8 | FREE U.S. shipping on all orders over $100!

$719.95
Students and Educators: Enroll or Log in for exclusive EDU savings!
Notify me Find a dealer
  • 4-step Counterbalance Counterbalance will help you counter the weight of your rig or heavy lens. Each step provides a different amount of counterbalance: 0 lb. (0 Kg), 5.5 lb. (2.5Kg), 11.0 lb. (5.0Kg), 17.6 lb. (8.0Kg)
  • 75mm Flat base head with 3/8" thread The S8 is equipped with a flat base with a 3/8" thread, allowing you to mount the head separately on sliders, jibs, monopods or half ball adapters.
  • Independent Locks Both the pan lock and tilt lock can be turned on or off independently and are located on the operator side of the head for easy control. Tilt range for the S8 is +90o/-75o
  • Continuous Pan Drag Dial in the perfect amount of tension necessary with the variable pan drag.
  • Adjustable Leg Angles For an extra measure of flexibility, Benro tripod legs can be independently locked into place at three different angles to enable shooting in cramped quarters, on irregular surface areas, or at ground level

Overview

The Benro S8 video tripod kits are jam packed with features that you actually need. Built for HDSLR cameras with rigs and long lenses or the latest video cameras, the S8 kits support up to 17.6 lb. Equipped with a 75mm flat base with a 3/8" thread, the S8 becomes a versatile creative tool allowing you remove the 75mm half ball adapter to mount the head separately on sliders, jibs, or monopods.

Other features include: pan & tilt lock, pan & tilt drag, 4-step counterbalance, illuminated bubble level and two 3/8" accessory mounts for attaching monitor arms or audio recorders directly to the head. This allows you to attach accessories without needing a cage or rig to do so.

Available in both Aluminum Alloy and Carbon Fiber, each S8 Video Tripod Kit is based on an eighth-generation design of single leg tubes and flip lever leg lock mechanisms. The tripod itself was made in combination with strategically select cast and machined aluminum and magnesium alloy components. Multi-angle leg locks allow each leg to be positioned independently for quick setup and uneven terrain. The rubber feet can be replaced with a set of stainless-steel spiked feet, which are included. For additional stability there is a weight hook at the bottom of the center column for hanging a camera bag or other weight.
Max height = 63.8 in
Closed length = 31.5 in

Specifications

Back Tilt Range:
-70°
Base Mount Thread:
3/8"-16
Bowl Size (mm):
75
Closed Length (cm):
81
Closed Length (in):
31.88976377952756
Converts to Monopod:
N
Counterbalance:
4 Steps (0-3)
Family:
S Series
Foot Mount:
UNC 3/8-16
Foot Size (mm):
24
Foot Type:
Rubber
Forward Tilt Range:
+90°
Independent Leg Spread:
Yes-with 3 stops
Leg Diameter 1 (mm):
32.4
Leg Diameter 2 (mm):
28.6
Leg Diameter 3 (mm):
25.2
Leg Lock Type:
Flip Lock
Leg Material:
Carbon Fiber
Leg Sections:
3
Leg Diameter (mm):
32.4mm
Maximum Height (in):
63.77952755905512
Maximum Height (cm):
162
Maximum Height Converted to Monopod (in):
N/A
Maximum Height w/Column Extended (cm):
162
Maximum Height w/Column Extended (in):
63.77952755905512
Maximum Payload Capacity (lb):
17.63698096
Maximum Payload Capacity (kg):
8
Physical:
 
Minimum Height (cm):
31.5
Minimum Height (in):
12.401574803149606
Pan Drag:
Continuous
Pan Lock:
Y
Panning Range:
360
Product Height (cm):
89.92cm
Product Height (in):
35.4in
Product Length (cm):
18.03cm
Product Length (in):
7.1in
Product Weight (kg):
4.5kg
Product Weight (lb):
9.92lb
Product Width (cm):
18.03cm
Product Width (in):
7.1in
Quick Release Type:
Slide-In Video (QR13)
Tilt Drag:
Continuous
Tilt Lock:
Y
Top Plate Diameter (mm):
75
Warranty:
3 Year

Welcome to the NEW PhotoVideo EDU.

To take advantage of the savings, please make sure to register.

If you were eligible on the old site, you must resubmit your documents to re-establish your eligibility.

Enroll